Motion Detectors -18 Facts About Motion Detector Alarms

Get the facts you need to know about Motion Detector Alarms...:

1. A motion detector is a device which is used in various security and surveillance systems.
2. They are extremely sensitive and may detect slight motions.
   Detector alarm is one of those products, which are proved to be very helpful to protect your house and are the best way to secure your home.
3. Wireless alarm systems are the latest technology and are easier to install compared to the hard-wired alarm systems.
4. Nowadays, alarm systems come in affordable prices, range and advanced features.
5. They could very easily be secured with a little bit of masking tape rolled directly below the device
6. Motion Detectors are utilized to collect position, velocity and speeding details of moving objects
7. Motion detectors will not likely evaluate distances that are lower than 12-15 cm, correctly, and would not pick up anything closer that ½ meter away.
8. Motion detectors that have dual technology are way better in protecting against false alarms.
9. Detectors may detect motion using optics or acoustics and could be passive or active.
10. They can be used with one or more other sensors connected to the interface.
    The alarm can be integrated with other devices that alert the user to the presence of a moving object within the device's field of view.
11. Detectors will start the alarm if anyone opens, cuts, or breaks your window
12. Alarm Sounds when any movement is detected in a protected area.
13. Alarm activation and deactivation is done with the press of a single button.
14. In an alarm system that has a motion detector, it is important to look for a system in which the sensitivity of the motion detector can be adjusted or even switched off when needed.
15. If the alarm system is to alert the property owner to intruders, then sensors should be set at each entry point and across any large window openings.
16. If your alarm system is monitored, it will send a signal to the central monitoring station each time it is activated (i.e...Wireless alarm systems usually contain a number of components, including sensors to indicate when a door opens or closes, signal arrays to convey radio alerts back to a central processing station.
17. An alarm unit must be re-programmed with your security code each time the batteries are removed or replaced. If you are required to change the personal code for any reason you must remove the batteries.
18. Nearly all Alarm Control Panels, whether Hardwired, Wireless, or Hybrid (combination), will require some hardwiring.